Technics SE-A1010 - Page 5

©
®
e
Household AC outlet
| (AC 120 V/60 Hz)
Stereo connection
cables
| SE-A1010 |
i INPUT
; TERMINALS
i Te
| D 4
i D:
ue
SE-A1010
INPUT
TERMINALS
e e
© à
D +
INP
TERM
ə
D *
DIREC
UT
INALS
&
DIRE!
De
LS)
Do |
supply cord
{included}
Surround
speakers
Connections
Connecting the power supply EJ
Connect the AC power supply cord only after all other connections
have been made.
Multiple amplifier system
Connect two or three of these amplifiers to one SU-C1010 Control
Amplifier to create different systems.
Use 3 when playing 6 channel systems, such as DVD.
Use 2 for more control over bass and treble balance, or to separate
the L and R channels to get a better orientation effect.
N
Connect the remote control cables (included)
as shown. ,
The illustration is an example of when three of these units are
used. Connection (@)} isn't necessary when two are used.
This connection allows you to control the system's power
through the SU-C1010.
Connect the stereo connection cables and
speakers to suit the system.
Three examples of connection follow. All cables and
speakers not included.
Example 1: To playback 6 channel sound from DVDs
B-9
Use one of these units for the front speaker channels (L and
R), one for the subwoofer and center channels, and one for
the surround channels (L and R).
Read the operating instructions for SU-C1010 and the DVD
player carefully for connection and set-up details.
(continued on next page)
RQT5006