Technics SE-CH505A - Connections; Flat Cable Connection Guide; FM Indoor Antenna Connection

SE-CH505A
—@ Connections
(Back of product)
SL-CH505
I Connect the flat cable. Z Connect the FM indoor antenna.
Connecting Disconnecting install the antenna on a wall at a height and in a direction which
a) result in the best reception.
y - (y i=— Adhesive tape
-— FM indoor antenna
(included)
1. Connect the shorter flat cable to the terminal of the tuner/sound
processor and amplifier.
2. Connect the longer flat cable to the terminal of the tuner/sound
processor, compact disc player, and cassette deck.
The tip of the internal antenna wire should not come into contact with
Route the cable horizontally (underneath the heat outlet grille) so any metal objects.
that the side with the white-coloured lead is positioned at the When you cannot get a good reception with this FM indoor antenna,
front.
we
recommend
you
install
an
FM
outdoor
antenna.
Be sure to connect the blue-coloured connector to B1 (tuner/ (Not included. See page 8.)
sound processor).
After connection, fold and press the cable as flat to the back of the
unit as possible.
Heat outlet gritle
Do not try connecting or disconnecting the flat cable
while the power is switched to ON.