To Next PageTo Next Page
Need help?Do you have a question about the Technics SH-E7 and is the answer not in the manual?
General| Type | Stereo Graphic Equalizer |
|---|---|
| Equalization Range | ±12 dB |
| Input Impedance | 47 kΩ |
| Output Impedance | 1 kΩ |
| Signal-to-Noise Ratio | 100 dB |
| Total Harmonic Distortion | 0.005% |
| Frequency response | 5 Hz to 100 kHz |
| Input Sensitivity | 150 mV |
| Frequency Bands | 7 bands |
| Dimensions | 430 x 95 x 285 mm |
| Frequency Range | 16 kHz |
Details on frequency range, maximum output voltage, and rated output voltage.
Covers input sensitivity, signal-to-noise ratio, impedance, gain, distortion, and input voltage.
Information on equalization level controls, center frequencies, power supply, dimensions, and weight.
Lists sections covering control locations, connections, and operational procedures.
Lists sections on applications, accessories, disassembly, and block diagrams.
Lists sections detailing IC terminal functions and replacement parts.
Identifies and explains controls, indicators, and buttons on the front panel.
Details rear panel outlets and remote control terminals for connectivity.
Instructions for connecting the equalizer to amplifiers and remote control devices.
Covers power on, volume control, EQ setting, spectrum display, and tone adjustments.
Explains how to memorize, store, and recall custom equalization settings.
Details reverse curve, EQ Plus features, and lithium battery information and warnings.
Guidance on noise reduction, vocal enhancement, and boosting disco music frequencies.
Techniques for reducing tape hiss and customizing car stereo sound settings.
Lists included accessories like connection cables and remote control cords with part numbers.
Step-by-step guide for removing the cabinet, front panel, and main PCBs.
Illustrates the overall signal path and major functional blocks of the equalizer.
Detailed pinout and function for microcomputers IC51 and IC52.
Detailed pinout and function for microcomputer IC54.
Detailed pinout and function for electronic volume control ICs (IC300, IC400).
Important safety notices and warnings regarding lithium battery handling and replacement.
