Technics SH-GE70 User Manual

•
A
,
,
Stereo Graphic Equalizer
SH-GE70
OPERATING INSTRUCTIONS
•
1B1 [GNl
Notes:
•Specifications differ according to the area code.
•The "EB" area code, for example, indicates United Kingdom specifica-
tions.
•The "EB" indication is shown on the packing case and serial number tag.
Before operating this unit, please read these instructions completely.

Technics SH-GE70 Specifications

General

Total Harmonic Distortion	0.005%
Control Range	±12dB
Type	Graphic Equalizer
Input Sensitivity	150mV
Frequency Bands Specific	63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz

Summary

Suggestions for Safety

Accessories

Connections

Front Panel Controls and Functions

Power and Mode Controls

Details on power switch, memory, equalization, input, and recording mode selectors.

Level and Display Controls

Explains how to adjust equalizer levels and select display modes for visual feedback.

Preset Memory Buttons

Instructions for selecting and programming preset equalization curves into memory.

Equalization/Spectrum Display

Details the different display modes for equalization levels and spectrum analysis.

Indicator Lights

Explanation of various indicator lights on the unit indicating status and functions.

Operation

Adjusting Tone Quality

Guides users through initial setup and adjusting the unit for desired tone quality.

Adjusting Sound and Volume

Instructions for fine-tuning sound levels and adjusting the amplifier's volume.

Programming Equalization Curves

Step-by-step guide to programming custom equalization curves into the unit's memory.

Reversed Equalization Curve

Explains how to create a reversed equalization curve for specific audio correction needs.

Pre-programmed Curves

Overview of six pre-programmed equalization curves and their intended uses.

Troubleshooting Guide

Maintenance

Technical Specifications