Technics SH-GE70 User Manual

We want to thank you for selecting this product and to
welcome you to the growing family of satisfied
Technics product owners around the world.
We feel certain you will get maximum enjoyment from
this new addition to your home.
Please read these operating instructions carefully,
and be sure to keep them handy for convenient
reference.
Contents
• For United Kingdom 2
•Suggestions for Safety 3
•Accessories 4
•Connections 4
•Front Panel Controls and Functions 5
•Operation 7
•Troubleshooting Guide 11
•Maintenance 11
•Technical Specifications 11
For United Kingdom
("EB" area code model only)
The "EB" indication is shown on the serial number tag.
Important
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCOR-
DANCE WITH THE FOLLOWING CODE.
BLUE: NEUTRAL
BROWN: LIVE
This apparatus was produced to BS 800.
As the colours of the wires in the mains lead of this apparatus may
not correspond with the coloured markings identifying the terminals
in your plug proceed as follows. The wire which is coloured BLUE
must be connected to the terminal which is marked with the letter N
or coloured BLACK.
The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured RED.
Under no circumstances must either of the above wires be
connected to the earth terminal of a three pin plug.
-2-

Technics SH-GE70 Specifications

General

Total Harmonic Distortion	0.005%
Control Range	±12dB
Type	Graphic Equalizer
Input Sensitivity	150mV
Frequency Bands Specific	63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz