Technics SH-GE70 User Manual

Accessories
.
• Stereo connection cables .2
•AC power supply cord
1
Note: The configuration of the AC power supply cord differs according to area.
Connections
Make connections in the numbered sequence by using the included cables
|T1 Connect the stereo connection cables.
The illustration below shows an example of connections made
when this unit is combined with a Technics electronic component
system, and shows only the connections to be made to and from
this unit in that combination.
\2\ Connect the AC power supply cord.
To the AC outlet of the audio equipment, or household AC outlet.
Note:
The configuration of AC power supply cord differs according to
area.
Q Connect this cord only after all other cables and cords have
been connected.
If the cord is to be connected to the household AC outlet, cut off
and dispose of the plug and replace with a suitable plug. (Refer to
"For United Kingdom".)
@ Fit a suitable plug to an AC power supply cord.
/
Household AC [7r\l ,'X ^
outlet EZl *??~
Amplifier (not included)
MONITOR AC OU
I-TAPE1T r-j-
REC PLAY I— —
OUT BACK
0
I
<a
TLET
T|
P
This unit
|1 I Stereo connection
A A cables (included)
r TAPE -i
• 1 REC OUT PLAYBACK
|L) @-,
H
©-
-t
LINE
(fl
IN
)
-o
LINE
(
OUT
5)
-O
• — |
1 o 1 o |
V vL— HI Stereo connection
Tape deck ^T^T
cables
<
not included
)
(not included)
(( 5)
d
1
4
a
LINE IN LINE OUT
(3
(3
4-

Technics SH-GE70 Specifications

General

Total Harmonic Distortion	0.005%
Control Range	±12dB
Type	Graphic Equalizer
Input Sensitivity	150mV
Frequency Bands Specific	63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz