Technics SL-1200MK7 User Manual

English
(10)
10
Putting the player together
(continued)
In order to prevent damage during shipping, some of the equipment has been disassembled.
Put the player together in the following order.

Before setting up, put on the stylus guard to protect the stylus tip, return the tone arm to the
arm rest and fix it with the arm clamp.

Do not connect the AC mains lead until set up is complete.

When fitting the turntable, prevent foreign material from getting in between the main unit and
turntable.

Do not touch or scratch the board.

Front side
(Printed side):
Record mounting face

Back side: Slip face
Turntable
Board
Centre spindle
Balance weight
Slip sheet
Slipmat
Head shell
(

9)
Attention
Handle carefully as
this is heavy.

Technics SL-1200MK7 Specifications

General

Drive Method	Direct Drive
Motor	Brushless DC motor
Wow and Flutter	0.025% WRMS
Tonearm Effective Length	230 mm
Tonearm Overhang	15 mm
Cartridge	Not included
USB	No
Bluetooth	No
Power Supply	AC120 V, 60 Hz
Turntable Platter	Aluminum die-cast
Speeds	33 1/3 RPM, 45 RPM, 78 RPM
Tonearm Type	Universal Static Balance
Cartridge Weight Range	5.6 - 12.0 g
Dimensions	453 x 353 x 169 mm
Weight	9.6 kg
Signal-to-Noise Ratio	78dB (DIN-B)
Outputs	RCA Phono