Do you have a question about the Technics SL-1200MK2 and is the answer not in the manual?
Product color | Silver |
---|---|
Power requirements | AC120V, 60Hz |
Signal-to-Noise Ratio (SNR) | 78 dB |
Power consumption (typical) | 14 W |
Depth | 360 mm |
---|---|
Width | 453 mm |
Height | 160 mm |
Weight | 12000 g |
General specifications including power supply, consumption, dimensions, and weight.
Details specifications for the turntable mechanism, drive, motor, platter, speeds, torque, braking, wow/flutter, and rumble.
Covers tonearm specifications such as type, length, adjustment range, mass, friction, and tracking error.
Step-by-step guide for removing the bottom cover and bottom base of the unit.
Explains part numbering, safety notices for marked components, and area-specific parts.
Procedure for adjusting pitch control and its gain with frequency counter and tester.
Procedure for adjusting the brake mechanism using a potentiometer.
Illustrates the exploded view of cabinet and chassis components with part numbers.
Illustrates the exploded view of tonearm components with part numbers.
Provides information and warnings for replacing fuses, emphasizing using the correct type.
Shows terminal assignments for transistors, diodes, and ICs used in the circuit.
Details the schematic of the power source circuit, including components and connections.
Illustrates the block diagram for the turntable drive and control functions.
Shows the block diagram for the pitch control system.