Do you have a question about the Technics SL-1200M7L and is the answer not in the manual?
Drive Method | Direct Drive |
---|---|
Type | Manual Turntable |
Wow and Flutter | 0.025% WRMS |
Tonearm Type | Universal Static Balance |
Tonearm Effective Length | 230 mm |
Tonearm Overhang | 15 mm |
Power Consumption | 8 W |
Motor | Brushless DC motor |
Turntable Speeds | 33 1/3, 45 rpm |
Platter | Aluminum die-cast, 332 mm diameter |
Cartridge Weight Range | 5.6 - 12.0 g 14.3 - 20.7 g (including headshell) |
Terminals | Ground Terminal x 1 |
Dimensions | 453 x 353 x 169 mm |
Weight | 9.6 kg |
Starting Time | 0.7 sec (33-1/3 rpm) |
Signal-to-Noise Ratio | 78 dB (DIN-B) |
Tracking Force Range | 0-4 g |
Power Supply | AC 120 V, 60 Hz |
Essential safety warnings for the unit and its AC mains lead, covering moisture, liquids, and proper connection.
Cautions for unit placement, ensuring ventilation, stability, and avoiding environmental hazards like heat and sunlight.
Instructions for attaching a cartridge to the head shell, covering alignment and tightening screws.
Procedure for attaching the balance weight to the rear of the tone arm for stylus pressure adjustment.
Instructions for connecting the turntable to amplifiers or mixers via PHONO cables and earth lead.
Guidance on connecting the AC mains lead to the unit and confirming outlet wattage.
Steps to adjust the unit's height using insulators to ensure it is perfectly horizontal.
Procedure to set the tone arm to horizontal balance using the balance weight.
Guide to configuring LED colours, reverse playback, 78 rpm, torque, and brake settings via internal switches.