Technics SL-1200M7L User Manual

06
Accessories
In order to prevent damage during shipping some of the equipment has been disassembled.
Please check and identify the supplied accessories. (Some accessories parts are supplied in a bag.)
Turntable (1 pc.)
(TYL0332)
Slipmat (1 pc.)
Slip sheet (1 pc.)
(TBMX5371)

One of each is provided with
the unit. The slip sheet is a
thin, transparent sheet.
Be careful not to throw it
away by mistake.
Dust cover (1 pc.)
(TTFA0617)
Technics LABEL for limited
edition (1 pc.)
EP record adaptor (1 pc.)
(TPH0339)
Balance weight (1 pc.)
(TYL0295)
Head shell (1 pc.)
(TYL0331)
Screw set for cartridge (1 set)
(TTV0022-A)

Nuts (2 pc.)

Screws-short (2 pc.)

Screws-long (2 pc.)

Washers (2 pc.)
(Supplied in a bag)
PHONO cable (1pc.)
PHONO earth lead (1pc.)
(TAQ0036)
AC mains lead (1 pc.)
(K2CT3YY00096)
Control vinyl labels (2pc.)
SL-1200M7LBY (YELLOW) / SL-1200M7LBR (RED)
SL-1200M7LBG (GREEN) / SL-1200M7LBA (BLUE)
SL-1200M7LBC (BEIGE) / SL-1200M7LBW (WHITE)
SL-1200M7LBK (BLACK)

With your control vinyl installed on the turntable,
affix the label passing the spindle through its centre hole.
SL-1200M7LEB.indd06SL-1200M7LEB.indd06 2022/01/2617:43:162022/01/2617:43:16

Technics SL-1200M7L Specifications

General

Drive Method	Direct Drive
Type	Manual Turntable
Wow and Flutter	0.025% WRMS
Tonearm Type	Universal Static Balance
Tonearm Effective Length	230 mm
Tonearm Overhang	15 mm
Power Consumption	8 W
Motor	Brushless DC motor
Turntable Speeds	33 1/3, 45 rpm
Platter	Aluminum die-cast, 332 mm diameter
Cartridge Weight Range	5.6 - 12.0 g 14.3 - 20.7 g (including headshell)
Terminals	Ground Terminal x 1
Dimensions	453 x 353 x 169 mm
Weight	9.6 kg
Starting Time	0.7 sec (33-1/3 rpm)
Signal-to-Noise Ratio	78 dB (DIN-B)
Tracking Force Range	0-4 g
Power Supply	AC 120 V, 60 Hz