To Next PageTo Next PageWhy is my Technics SL-1200G humming?
Humming during playback can occur if other appliances or their AC mains leads are near the stereo connection cable. Separate the appliances and their AC mains leads from the Technics Turntable. Also, ensure that the earth lead is correctly connected.
What to do if Technics Turntable has power but no sound?
If your Technics Turntable has power but no sound, ensure that you connect the PHONO cables to the amplifier’s PHONO terminals.
How to fix reversed left and right sounds on Technics Turntable?
If the left and right sounds are reversed on your Technics Turntable, double check all connections.
What to do if the strobe light or blue indicator is blinking on Technics Turntable?
If the strobe light or the blue indicator is blinking on your Technics Turntable: 1. Turn [ON/OFF] to OFF. 2. Pull out the power plug. 3. Wait for three seconds, and then insert the plug again. Alternatively, turn [ON/OFF] to ON and press [START-STOP] to rotate the turntable. If the issue continues, check which one is blinking and contact our service representative.
Why Technics SL-1200G has no power?
If your Technics Turntable has no power, plug the mains lead in firmly.
General| Drive Method | Direct Drive |
|---|---|
| Type | Manual Turntable |
| Motor | Coreless Direct Drive Motor |
| Tonearm Effective Length | 230 mm |
| Tonearm Overhang | 15 mm |
| Rumble | 78 dB (IEC 98A Weighted) |
| Turntable Platter | Aluminum Die-cast |
| Wow and Flutter | 0.025% WRMS |
| Tonearm Type | Static Balance |
| Cartridge Weight Range | 5.6g to 12.0g (without auxiliary weight) |
| Speed | 33 1/3 RPM, 45 RPM, 78 RPM |
| Dimensions | 453 x 173 x 372 mm |
| Weight | 18 kg |
| Power Supply | AC 120V, 60Hz |
Welcome and overview of the Technics SL-1200G turntable.
Highlights of direct drive, tone arm, and construction.
Critical safety advice for the unit, its environment, and the AC mains lead.
Step-by-step instructions for safely replacing the fuse in the mains plug.
Instructions for proper disposal of old electronic equipment within the EU.
Comprehensive list and model numbers of supplied accessories.
Labeled diagram identifying all key components of the SL-1200G.
Step-by-step instructions for cartridge mounting and overhang adjustment.
Guide to fitting the turntable and rotor shaft assembly onto the main unit.
Instructions for placing the turntable mat and attaching the balance weight.
How to connect the player to audio systems and general setup advice.
Instructions for adjusting unit height and fitting the dust cover.
Setting horizontal balance and stylus pressure for accurate tracking.
Setting the anti-skating force to match the stylus pressure.
Procedure for setting the correct tone arm height for the cartridge.
Fine-tuning armlift height and turntable start/brake speeds.
Step-by-step process for playing vinyl records, including start/stop and stylus lighting.
Using pitch control and strobe mirrors to adjust playback speed precisely.
Guidelines for cleaning the stylus, records, and dust cover.
Instructions for safely moving and storing the turntable.
Solutions for power, sound, humming, and indicator problems.
Steps to update the turntable's firmware via USB.
Detailed technical data for power, dimensions, mass, and turntable performance.
Technical details on tone arm length, overhang, and cartridge compatibility.
