English
(4)
4
Features
Introduction
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
About descriptions in these operating instructions
- Pages to be referred to are indicated as “(
00)”.
- The illustrations shown may differ from your unit.
Sales and Support Information
Customer Communications Centre
For customers within the UK: 0333 222 8777
For customers within Ireland: 01 447 5229
Monday–Friday 9:00 am – 5:00 pm, (Excluding public holidays).
For further support on your product, please visit our website: www.technics.com/uk/
The coreless direct drive eliminates
cogging and achieves smooth
rotation
The twin-rotor construction reduces minute
vibration during rotation while maintaining
high torque.
The high-precision motor control technology
switches the drive mode depending on the
operational status of the motor.
This technology combines high torque with
high stability.
The tone arm with high-precision
bearings achieves high initial-
motion sensitivity
The tone arm pipe employs magnesium
which provides high rigidity.
The use of traditional Technics gimbal
suspension construction and high-precision
bearings attains high initial-motion sensitivity.
Three-layered turntable that
delivers smooth rotational stability
The turntable has a three-layered construction
with a rigidly combined brass and aluminium
diecast platter, and a rubber covering its rear
surface to eliminate unnecessary resonance.
With this construction, high rigidity and
vibration damping are achieved.
The use of a heavyweight-class turntable that
generates a large inertial mass.
It delivers smooth rotational stability.
Four-layered cabinet construction
and insulators based on thorough
anti-vibration design
The top panel of immaculate aluminium
has been added to the three-layered
construction of aluminium diecast, BMC, and
heavyweight-class rubber. This four-layered
construction combines high rigidity with a
high quality finish and feel.
The insulators employ special silicon rubber
to ensure high vibration damping and long-
term reliability. They completely dampen
external vibration and suppress howling
noise.
High-quality terminals
The use of brass-milled and gold-plated
terminals prevents degradation in sound
quality.
Inside the case, the metal shielding
construction is used to diminish the effects of
external noise.
Highly accurate turntable speed
maintained with the pitch control
The digital control method is adopted to
achieve constant pitch control.
The pitch variable range select button (×2) is
provided. The pitch control with the range up
to ±16 % is possible.
To Next Page
Loading...
Need help?
General
