Need help?Do you have a question about the Technics SL-1300MK2 and is the answer not in the manual?
General| Motor | DC Servo Motor |
|---|---|
| Drive Method | Direct Drive |
| Effective Arm Length | 230 mm |
| Overhang | 15 mm |
| Stylus Pressure Adjustment Range | 0-2.5g |
| Cartridge | Not included |
| Turntable Platter | Aluminum Diecast |
| Speeds | 33 1/3 and 45rpm |
| Wow and Flutter | 0.025% (WRMS) |
| Rumble | -78 dB (DIN-B) |
| Tonearm Type | S-shaped Tonearm |
Instructions for connecting and mounting a phono cartridge to the headshell.
Set the tonearm height to match the cartridge for optimal tracking.
Balance the tonearm and set the correct stylus pressure.
Connect the AC power plug and output terminals to amplifier/receiver.
Fine-tuning turntable speed using the pitch control.
High precision digital pitch control using quartz synthesis.
To Next Page
