Need help?Do you have a question about the Technics SL-100C and is the answer not in the manual?
General| Drive Method | Direct Drive |
|---|---|
| Turntable Speeds | 33 1/3 RPM, 45 RPM |
| Platter | Aluminum Die-cast |
| Tonearm Type | Static Balance |
| Phono Output | Yes |
| Weight | 9.9 kg |
| Motor | Brushless DC Motor |
| Wow and Flutter | 0.025% W.R.M.S. |
| Effective Tonearm Length | 230 mm |
| Overhang | 15 mm |
| Headshell Weight | 7.6 g |
| Power Supply | AC120 V, 60 Hz |
| Power Consumption | 8 W |
| Starting Torque | 1.5 kgf·cm |
| Tracking Error Angle | Within 2° 32' |
| Tonearm Height Adjustment Range | 0-6 mm |
| Frequency Response | 20 Hz to 20 kHz |
| Cartridge Weight Range | 5.6 - 12.0g (without auxiliary weight), 14.3 - 20.7g (including headshell) |
| Signal-to-Noise Ratio | 78dB (DIN-B) |
Specific safety instructions related to the AC power cord and plug.
Guidelines for proper disposal of the product in EU countries.
List and description of all included accessories with the turntable.
Identification and labels for all parts of the turntable.
Instructions for assembling the turntable from its disassembled state.
Steps for fitting the turntable, mat, head shell, and balance weight.
Procedure for safely removing the turntable from the unit.
Steps for connecting the turntable to an amplifier or component system.
Instructions for properly installing the turntable unit and fitting the dust cover.
How to adjust horizontal balance and set the correct stylus pressure.
Instructions for adjusting anti-skating and tone arm height.
How to adjust the armlift height for proper record playback.
How to safely remove and attach the stylus cover before playing.
Using the cue lever, stopping play, and the auto lift-up function.
Instructions for playing EP and SP records.
Cleaning instructions for parts and procedures for moving the unit.
Detailed steps for removing and attaching a new cartridge.
To Next Page