Technics SL-100C - Specifications

Maintenance
23
Specifications
General
Power supply AC 110 - 240 V, 50/60 Hz
Power
consumption
8.0 W (ON)
Approx. 0.2 W (OFF)
Dimensions
(W×H×D)
453 x 169 x 372 mm
Mass Approx. 9.9 k
g
Operating
temperature
range
0 °C to +40 °C
Operating
humidity range
35 % to 80 % RH
(no condensation)
Turntable section
Drive method Direct drive
Motor Brushless DC motor
Turntable platter Aluminum diecast
Diameter: 332 mm
Weight: About 2.0 k
g
(including rubber sheet)
Turntable speeds 33-
1
/
3
rpm, 45 rpm, 78 rpm
Starting torque 0.18 N·m (1.8 k
g
·cm)
Build-up
characteristics
0.7 s. from standstill to
33-
1
/
3
rpm
Braking system Electronic brake
Wow and flutter 0.025 % W.R.M.S.
Tone arm section
Type Static Balance
Effective length 230 mm
Overhang 15 mm
Tracking error
angle
Within 2° 32’
(at the outer groove of
30 cm record)
Within 0° 32’
(at the inner groove of
30 cm record)
Offset angle 22°
Arm-height
adjustment range
0 – 6 mm
Stylus pressure
adjustment range
0 – 4
g
(direct reading)
Head shell weight Approx. 7.6
g
Applicable
cartridge weight
range
5.6 – 12.0
g
14.3 – 20.7
g
(including the head shell)
Shell terminal ø1.2 mm 4 pin terminal
Cartridge section
Type VM type
Output voltage 4.0 mV (1 kHz, 5 cm/sec.)
Mass 6.1
g
Stylus pressure 1.8 to 2.2
g
(2.0
g
standard)
Specifications are subject to change without
notice.
SL-100CEB210118.indd23SL-100CEB210118.indd23 2021/03/2317:28:102021/03/2317:28:10