Technics SL-PD349 Service Manual

SL-PD687 |
No. i P ee
een
RefNo.
|
Removal
of
the
rotary
tray
Procedure Procedure 3
etaeeee?
12d
Sand @ Frc
©,
>
ae
1. Pull out the FFC from connector(CN301).
2. Remove 1 connector(CN404).
4. Lift up the main P.C.B. in the direction of arrow, and
release the 2 ribs on the chassis ass'y. Then , remove the
1. Keep the close lock gear pressed in the
direction of arrow, and move the tray
2.
Rotate
the
rotary
tray
to
the
position
4,
Remove
the
spring
and
washer.
that
can
be
confirmed
the
hole@
in
5.
Remove
the
rotary
tray
in
the
3, Remove the 1 screw(@).
Clamp plate ass'y
1. Remove the 2 screws(@, @).
2. Push the claw in the direction of arrow@, and then remove
the clamp piate ass'y in the direction of arrow@.
Clamp plate ass'y
Claws
‘* Release the 3 claws in the direction of arrow.
1. Pull out the FFC trom connector(CN301).
2, Remove 1 connector(CN404),
3. Remove the 4 screws( @ ~
Ref.No. Removal of the mechanism base Ref.No. Removal of the photo transistor
12 ass'y 13 PCB.
Procedure Procedure
1-25-12 S. eo
rc
tO onsor
Pros ansiaor
a !
; consos
3
é Mechanism base ass'y_ vy
* Release the 2 claws in the direction of arrow.
‘3,
Remove
the
4
screws(@-@).
main
P.C.B.
in
the
direction
of
arrow).
assy
in
the
direction
of
arrow).
the
direction
of
arrow
@.
direction
of
arrow®.
Reto.
|
‘Removal
of
the
clamp
plate
ass'y
Ret.No,
|
Removal
of
the
fixed
plate,
magnet
RetNo.
|
Removal
of
the
sensor
P.C.B.
RetNo.
|
Removal
of
reduction
gear
and
clamper
15
=
Procedure
Procedure
Procedure
Procedure
110
11014
192513.
12514
+1415
16
‘¢ Release the 3 claws in the direction of arrow, and remove
the sensor P.C.B.
Ref.No. Removal of motor holder and
17 tray motor ass'y
Procedure
12518 ee
1, Remove the 2 screws(@,
2. Remove the motor holder and tray motor ass'y in the
direction of arrow.
1.
Release
the
2
claws
in
the
direction
of
arrow(D,
and
then
push
the
rivet
in
the
direction
of
arrow
@
2. Pull out the rivet,
3. Remove the belt.
3. Remove the reduction gear.
pe
Sige

Technics SL-PD349 Specifications

General

Brand	Technics
Model	SL-PD349
Category	CD Player
Language	English