Technics SL-PD349 Service Manual

‘SL-PD687
Reto. | Removal of the tray motor P.C.B. Ret No. | Removal of the tray roller Ratio. | Removal of the reinforcing plate, drive
2 gear(1) and drive gear(2)
Procedure
1214-419
Drive gear(1)
Tray motor assy
1, Remove the 2 screws
1, Release the 2 claw, and then remove the motor holder. Release the 2 claws in the direction of arrow, and then 2 Renave tie boris tote ‘3. Remove the drive gear(1) and drive gear(2).
2. Unsolder the terminais of the tray motor ass'y. remove the tray roller in the direction of arrow@.
Ref.No.
Removal of the drive lever
Raine: Removal of the close lock gear RefNo. | Removal of the open lock gear 23 " Pears
e
Procedt
Procedure Procedure ieee es Claw
12-14-20 ° 125914 @
f tai
Note) Be careful not to
damage the claw
because the claw
is breakable.
2. Push the claw in the direction of arrow@), and then move
1. Rotate the pulley gear to full position in the direction of the slide plate(1) in the direction of arrow@.
arrow. ‘3. Remove the drive lever in the direction of arrow@.
Ret.No. RefNo. | Removal of the drive cam and
oy Removal of the pulley gear ms (eduction gear
Procedure Procedure
1425924
1-25-22
Drive
cam
ao
23+
24-25,
1, Release the claw@ of open lock gear in the direction of
arrowD.
2. Release the claw © of open lock gear in the direction of 1. Remove the belt. 1. Remove the drive cam.
2, Release the 1 claw and then remove the close lock gear arrow, and then remove the of open lock gear in the 2, Flelease the 2 claws in the direction of arrow, and then | 2. Remove 1 screw( @).
and lock gear spring. direction of arrow. remove the pulley gear in the direction of arrow@. 3. Remove the reduction gear.
—u= ~15s—

Technics SL-PD349 Specifications

General

Brand	Technics
Model	SL-PD349
Category	CD Player
Language	English