Technics SL-PD647 - Removal of the operation P.C.B.; Removal of the power switch P.C.B.; Removal of the rotary tray; Removal of the rear cover

SL-PD647
Removal of the power switch P.C.B.
Removal of the operation P.C.B.
Procedure
1-2-5
Procedure
1-2-4
Power switch
P.C.B.
1. Remove the 7 screws( @ ~ @).
2. Release the 1 claw.
Spring
Washer.
Tray ass’y
2. Remove the 1 screw( @).
1.
Keep
the
close
lock
gear
pressed
in
the
direction
of
arrow@
3.
Remove
the
spring
and
washer.
and
move
the
tray
ass’y
in
the
direction
of
arrow@.
4,
Remove
the
rotary
tray
in
the
direction
of
arrow@).
a ae | Removal of the clamp plate ass’y
Procedure
Procedure
5
1-7 1-8
:
ie
Rear cover.
1. Remove the 2 screws(@, @).
2. Release the 1 claw.
1. Remove the 1 screw( @).
2. Release the 4 claws.