Technics SL-PD888 User Manual

ID sean function
This function is convenient to use when searching for a desired
track.
The function will search from the beginning of the track for a loud
section, and will play 10 seconds of the track centering around
that point.
The order of scanning is the same as for play mode.
ID SCAN Press ID SCAN.
ID scan will start.
«p> ł
A WE GP aad
<-> c:
llluminates
When the desired track has been found:
Press P.
The changer wili play the track from the begin-
ning.
To cancel ID scan
OSGAN Press ID SCAN while this function
is in operation.
The “ID" indicator will go out.
The changer will continue to play from the track being played.
Search function
You can search rapidly forward or backward on the disc for
specific sections.
Aa SEARCH opr
«a SEARCH = [In the play or pause mode]
Press and hold <q or PP.
<4: You can search backward.
Pb: You can search forward.
Release the button when you reach the
desired point.
The changer will return to the previous mode
(play or pause).
In sequential play mode:
You can search forward over discs and backward within the cur-
rent disc.
In other play modes:
You can search forward or backward only within the current
track.
For your reference:
The search function will begin slowly, and then, if the button is
held pressed for longer than 3 seconds, it will change to high-
speed search.
In the play mode, the sound levet decreases by 12 dB (1/4).
13

Technics SL-PD888 Specifications

General

Brand	Technics
Model	SL-PD888
Category	CD Player
Language	English