Technics SL-PD888

Repeat function
Play will continue endlessly in accordance with the specific play
mode selected.
REPEAT
REPEAT
[Before
or
during
play]
Press
REPEAT.
«p>
<i>" @2'
<i> cD
In sequential play mode:
All tracks of all discs will be played repeatedly.
(luminates
in program play mode:
The changer plays only the programmed selections in the pro-
grammed sequence repeatedly.
In delete play mode:
The changer plays the discs and tracks excluding the selections
to be deleted repeatedly.
In random play mode:
When the changer has played all the tracks on all the loaded
discs, it will select a new random sequence and play continuous-
ly. The sequence differs each time.
in spiral play mode:
The changer plays all tracks of all discs repeatedly in the se-
quence of spiral play.
To cancel repeat mode
REPEAT Press REPEAT again.
The “ © ” indicator will go out.
Time mode selection
The various time information of the current disc can be
displayed.
SL-PD988: Only available from the remote control.
SL-PD888/SL-PD788: Only available from the main unit.
TIME MODE
TIME MODE
{In the play or pause mode]
Press TIME MODE.
The information will change (as described
below) each time you press the button.
r —-»(1) Track number and elapsed play time of the
current track
@ Track number and remaining time of the
current track
mms
In all play modes:
When track number 21 or greater is playing, display @ shows
In programidelete/random/spiral mode:
The displayed information will alternate between displays Q) and
@ each time the button is pressed.
During operation of the edit guide function:
The remaining play time on side A or side B will be shown in
display @, and the elapsed play time for side A or side B will be
shown in display @).
When you stop playing and then start play again, the display will
return to display Q).
15