Technics ST-8080

We want to thank you for selecting this product
and to welcome you to the growing family of
satisfied Technics product owners around the
world. We feel certain you will get maximum
fully,
enjoyment from this new addition to your home.
Please read these operating instructions care-
and be sure to keep them handy for
convenient reference.
BEFORE USING THIS UNIT
Be sure to set the voltage selector to agree with the voltage
used in the region where the unit is used. The desired
voltage can be easily selected by using an ordinary screw-
driver. Never forget to always have the voltage selector
set to the correct setting because, if the setting is incorrect,
this unit could be ruined by using it on incorrect voltage.
(For some areas, they do not include ‘voltage selector”
for the safety standard and other reasons.)
STEREO SYSTEM COMPONENTS
AND THEIR CONNECTIONS
FM indoor antenna (included)
ra)
—
FM outdoor antenna
_..- (optional)
Remove this
antenna
when an FM
outdoor
antenna
Matching
transformer
is installed.
75-ohm coaxial cable
(optional)
Tape deck
(optional!)
AM outdoor antenna
(optional)
SSlrae
ta
Tatty
“ary
Sead)
DO WOT REMOVE SCREWS, SEE DOTKOM NOTICE
Connection wire
(included)
Terminals for
“TUNER” or ‘AUX"
Input terminals
(“LINE IN")
Decoder connection
terminals (See page 9)
FM MULTIPATH OUT
terminals (See page 8)
Voltage selector
Power cord
To AC outlet
Stereo integrated
amplifier (optional)
"Speaker systems
( optional)