Need help?Do you have a question about the Technics ST-HD55 and is the answer not in the manual?
General| Tuning Range (FM) | 87.5 - 108 MHz |
|---|---|
| Signal-to-Noise Ratio (AM) | 50 dB |
| Type | Digital Tuner |
| Tuning Bands | FM |
| Frequency Response (FM) | 20Hz to 15kHz |
Input sensitivity/impedance and output level details.
FM frequency range, S/N, and antenna terminal information.
AM frequency range specifications.
Details on clock type and programmable timer functions.
Overall dimensions and weight of the unit.
Explains how the self-diagnostic mode displays malfunction codes.
Lists display codes, corresponding problems, and correction procedures.
Steps for checking the tuner and FL printed circuit boards.
Steps for checking the main printed circuit board.
Detailed schematic of the tuner circuit.
Detailed schematic of the FL display circuit.
Detailed schematic of the operation control circuit.
Detailed schematic of the left LED circuit.
Detailed schematic of the right LED circuit.
Detailed schematic of the input/output terminal circuit.
Detailed schematic of the connector circuit.
Detailed schematic of the main circuit.
Pin functions for the System Control IC.
To Next Page
