Technics SU-810 - Page 7

Ref. No.
7
Procedure
1 ^ 2 -^ 6 -^7
Removal of the operation P.C.B.
1 . Pull out the 4 knobs ( 0 ~ 0 )-
2. Remove the 4 nuts (@~©).
3. Remove the 4 screws (©~®).
©Q^yo
• Use a wrench of the A
dimensions shown in B
the illustration above C
to remove nuts.
Operation P.C.B
11 mm
16 mm
longer than
22 mm
Ref. No.
8
I
Procedure
1->8
Checking of the main P.C.B.
2. Remove the 5 screws (®~®)
1 . Remove the 9 screws (0~©)
Front Panel
3. Remove the 3 screws
4. Remove the front panel.
Front
Panef
Main R C.B.
5. Remove the bottom chassis in the direction of the arrow ®.
6. Reinstall the front panel to the main P.C.B.