Need help?Do you have a question about the Technics SU-A4MK2 and is the answer not in the manual?
General| Weight | 9.5 kg |
|---|---|
| Speaker load impedance | 4 - 16 Ω |
| Type | Stereo Integrated Amplifier |
| Frequency Response | 5 Hz - 100 kHz |
| Signal-to-Noise Ratio | 100 dB |
| Input Impedance | 47 kΩ |
| Dimensions | 430 x 90 x 320 mm |
| Damping factor | 100 |
| Input sensitivity | 150mV (line) |
| Channel separation | 70dB (1kHz) |
| Output | Speaker output terminals |
Unit should be serviced by qualified technicians only. No service information is provided for customers.
Consult qualified technician for damaged cord, liquid ingress, rain exposure, or abnormal operation.
Request service from a qualified technician for adjustments not explained in operating instructions.
Input terminals for connecting various audio and video sources.
Terminals for connecting tape decks for recording and playback.
Output terminals for connecting to a power amplifier.
Controls for loudness, bass, treble, and high/subsonic filters.
Set volume to minimum before turning on power. Wait for stabilization before increasing volume.
Use input selector to choose playback source like tape, disc, or radio.
Select recording source using recording-mode selector; adjust level on tape deck.
Record from one tape deck to another using dubbing selectors.
Adjust bass and super-bass for deep bass reproduction and to correct speaker response.
Using treble controls to adjust phono cartridge frequency response.
Troubleshooting common issues encountered during disc playback.
Troubleshooting common issues with FM broadcast reception.
Troubleshooting common issues with AM broadcast reception.
Troubleshooting general issues that can occur at any time.
Detailed technical specifications for the amplifier section.
General specifications including power, dimensions, and weight.
To Next Page
