Technics SU-G700M2 Owner's Manual

13
English
Connections
(13)
AC power supply cord connection
Connect only after all other connections are
completed.
Note
• This unit consumes a small amount of AC power
( 31) even when the unit is in standby mode.
Remove the plug from the main electrical outlet
if you will not be using the unit for an extended
period of time. Place the unit so the plug can be
easily removed.
Speaker cable (not supplied)
AC power supply cord (supplied)
To a household
AC outlet
Insert the AC power supply cord up
to a point just before the round hole.
Speaker output correction (LAPC)
You can make the optimum adjustment
according to your own speakers. ( 24)

Technics SU-G700M2 Specifications

General

Output Power (8 Ohms)	70 W + 70 W
Output Power (4 Ohms)	140 W + 140 W
Analog Outputs	1 x Line
USB-B Input	Yes
Coaxial Digital Input	1
Headphone Output	Yes
Input Sensitivity	200 mV
Input Impedance	47 kOhms
Load Impedance	4 Ω - 16 Ω
Digital Inputs	Coaxial, Optical, USB-B
Analog Inputs	2 x Line
Phono Input	Yes
DAC	Yes
Bluetooth	Yes
Dimensions (W x H x D)	430 x 148 x 428 mm