Need help?Do you have a question about the Technics SU-G700 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Power Output (8Ω) | 70 W + 70 W (1 kHz, T.H.D. 0.5%) |
| Power Output (4Ω) | 140 W + 140 W (1 kHz, T.H.D. 0.5%) |
| Input Sensitivity/Impedance Line | 200 mV / 47 kΩ |
| Input Sensitivity/Impedance Phono | 2.5 mV / 47 kΩ |
| Speaker Impedance | 4Ω - 16Ω |
| USB-B Input | Yes |
| Coaxial Input | 1 |
| Standby Power Consumption | 0.3 W |
| Weight | 12.3 kg |
| Signal-to-Noise Ratio Phono | 83 dB (IHF-A) |
| Digital Inputs | Coaxial, Optical, USB-B |
| Analog Inputs | 1 (Phono) |
| Analog Outputs | 1 Line |
| Dimensions | 430 x 148 x 428 mm |
Details JENO Engine and LAPC for superior audio signal processing and speaker load adaptation.
Features a double chassis with steel plates to reduce vibration and noise for pure sound.
Employs partitions to separate circuit blocks based on signal level, minimizing interference for clear sound.
Identifies and describes the controls and indicators on the main unit of the SU-G700 amplifier.
Provides instructions for connecting speakers and the AC mains lead to the amplifier.
Guides on connecting and playing audio from CD players using coaxial or optical digital cables.
How to adjust Bass, Mid, Treble (Tone Control) and the Volume Attenuator for personalized sound.
Addresses heat buildup as normal and guides on checking for the latest firmware updates.
Procedure to restore all unit settings to their original factory defaults.
Guidelines for cleaning and maintaining the exterior of the unit safely.
Information on how to dispose of the unit and delete personal data before transfer or disposal.
Provides technical details on power, dimensions, mass, operating conditions, and general unit information.
Details the output power, load impedance, frequency response, and input sensitivity/impedance of the amplifier.
Lists the types and specifications of all available input and output terminals on the unit.
To Next Page
