Technics SU-G700 - Specifications; General Specifications; Amplifier Section Specifications; Terminals Section Specifications

34
Others
Specifications
(34)
■ GENERAL
Power supply
AC 220 V to 240 V,
50/60 Hz
Power
consumption
85 W
Power
consumption in
standby mode
Approx. 0.3 W
Dimensions
(W×H×D)
430 mm × 148 mm ×
428 mm
Mass Approx. 12.3 kg
Operating
temperature range
0 °C to 40 °C
Operating humidity
range
35 % to 80 % RH
(no condensation)
■ AMPLIFIER SECTION
Output power
70 W + 70 W
(1 kHz, T.H.D. 0.5 %, 8 ,
20 kHz LPF)
140 W + 140 W
(1 kHz, T.H.D. 0.5 %, 4 ,
20 kHz LPF)
Load impedance 4  - 16 
Frequency
response
PHONO (MM)
20 Hz to 20 kHz
(RIAA DEVIATION ±1 dB,
8 )
LINE
5 Hz to 80 kHz
(-3 dB, 8 )
DIGITAL
5 Hz to 90 kHz
(-3 dB, 8 )
Input sensitivity/
Input impedance
PHONO (MM) 2.5 mV / 47 k
LINE 200 mV / 22 k
■ TERMINALS SECTION
Headphones Jack
Stereo, 6.3 mm
0.75 mW, 32 
PC
REAR USB
Type B Connector
Analogue input
LINE IN ×2 Pin jack
PHONO (MM) Pin jack
Digital input
OPT IN ×2 Optical terminal
COAX IN ×2 Pin jack
Format support LPCM
Analogue output
LINE OUT Pin jack
PRE OUT Pin jack
System port
System control  3.5 mm, Jack
■ FORMAT SECTION
USB-B
USB Standard
USB 2.0 high-speed
USB Audio Class 2.0,
Asynchronous mode
DSD control mode
ASIO Native mode,
DoP mode