Need help?Do you have a question about the Technics SU-G700M2 and is the answer not in the manual?
General| Output Power (8 Ohms) | 70 W + 70 W |
|---|---|
| Output Power (4 Ohms) | 140 W + 140 W |
| Analog Outputs | 1 x Line |
| USB-B Input | Yes |
| Coaxial Digital Input | 1 |
| Headphone Output | Yes |
| Input Sensitivity | 200 mV |
| Input Impedance | 47 kOhms |
| Load Impedance | 4 Ω - 16 Ω |
| Digital Inputs | Coaxial, Optical, USB-B |
| Analog Inputs | 2 x Line |
| Phono Input | Yes |
| DAC | Yes |
| Bluetooth | Yes |
| Dimensions (W x H x D) | 430 x 148 x 428 mm |
Details on achieving clear and dynamic sound quality through JENO Engine.
Explanation of build quality for dynamic sound reproduction and vibration reduction.
Warnings and cautions regarding the unit's use, placement, and maintenance.
Safety instructions related to the AC mains lead and power connection.
Guidelines for unit placement and safe handling of batteries.
Specific safety caution for the AC mains lead.
Step-by-step instructions on how to replace the fuse in the AC mains plug.
Identification and description of various rear panel input and output terminals.
Detailed functions of remote control buttons and how to change remote control modes.
Introduction to the LAPC function for optimizing speaker output.
Steps for connecting a PC via USB and using it as an audio source.
Instructions for connecting the unit to an AV receiver or control amplifier.
Procedure for measuring amplifier output signal for speaker correction.
Steps for preparing and downloading firmware updates via USB flash memory.
Restoring factory defaults and resolving general unit operation problems.
Solutions for no sound, distorted sound, and PC recognition problems.
Detailed specifications for general, terminals, and amplifier sections.
To Next Page
