Technics SU-V60 - Disassembly Instructions

li DISASSEMBLY INSTRUCTIONS
ect Mo, How to remove the front panel
Procedure
1 1. Remove the connection rod.
2. Remove the 5 knobs (@ ~@ ).
3. Remove the 5 nuts (@~ @ ).
4, Remove the 4 screws (Q ~ @).
1. Push the 9 tabs (@ ~ @).
2. Remove the tone control P.C.B.
3. Remove the 3 screws (Q@ ~ @).
4. Remove the LED P.C.B.
Tone control P.C.B.
5, Remove the connector (J102 ~ J105,
J118, J119).
6. Remove the 1 lock pin ( ®).
7. Remove the ““Rec-select’”” switch ( @ ).
@ How to remove the “Rec-select” switch
Pusing the rec switch, shift it up as in Fig. 1.
@ How to fit the rec switch
(1) Shift the switch contact inside.
(2) Turn the ‘‘Rec-select”’ switch (selector knob)
counterclockwise.
(3) Let the ‘’Rec-select’’ switch claw change with the
switch, and shift the ‘’Rec-select’’ switch down
while pusing in.
Switch
5. Remove the 1 screw (®).
6. Push the 2 tabs (@, ®).
7. Remove the headphones P.C.B.
Headphones P.C.B.
Tone control P.C.B.