Part
V
• Local
control
Specify, for each part, whether the performance
played
on
this instrument's keyboard is output
by
this instrument's sound generator or not.
Local control
on
Notes play
on
this instrument's keyboard are output
by this instrument's sound generator and are sent
to the
MIDI OUT terminal.
Set local control to on/off by using the VARIA-
TION
button.
KN200
SOUND SELECT
0
0
HARPSI
-
PIANO
1
CHORD
o 0
PIANO
2 E PI
ANO
1
o 0 E
GRAND
E
PIANO
2
o 0
voN
oO d
KN400
SOUND SELECT
O
HARPS
1-
o
PIANO
1
CHORD
o 0
PIANO
2 E
PIANO
1
0
0
EGRAND
EPIAN02
BASS
~O
ACO~STICIA~TICI
o 0
voNod
d
III.
Set
the
functions
common
to
all
parts
• Receive mode
Set to the
single mode when you wish to receive
data using
only one basic channel . Set to the
multi mode when
you
wish to receive data
on
multiple channels.
Single mode (off)
Performance data is received only for the basic
channel assigned to the POLY (KN200) or the
POLY 1 (KN400) part. The performance is control-
led
by this instrument's AUTO PLAY CHORD and
CONDUCTOR (KN400) settings (the same
when you
play this instrument's keyboard).
For
example, s6llect single or multi for the receive
mode
by
using the leftmost button
in
the horizon-
tal row of the RHYTHM SELECT matrix.
Off ....... Single mode
On
....... Multi mode
RHYTHM
SELECT
M
ARCH
1 M
ARCH
2
COUNTRY
WALTZ
SWING
1
SWJNG2
DIXIE
~tg.z
00
ROCK
'N'
ROCK
BOSSA-
0
8
BEAT
1 8
BEAT2
ROLL
SHUFFLE
BALLAD
LATIN
1
LATIN
2
NOVA
0
JAZZ
SWING
LATIN LATIN
0
16
BEAT
1
16
BEAT2
ROCK
FUNK
ROCK
DISCO
ROCK
1
ROCK
2 0
o 0 0 0 0
000
QOOOOOOO;CS
N
as
MIDI
Local control off
Notes
played
on
this instrument's keyboard are not
output by this instrument's sound generator but are
sent to the
MIDI OUT terminal.
•
The
lit VARIATION indicator means the local
control
on
status.
Set the
MIDI functions for each of the other
parts.
MUlti
mode (on)
In
this mode the KN200/KN400 is used
as
a sound
generator, and data can
be
received independently
for
all sound parts for which a basic channel
is
assigned.
•
In
multi
mode,
the maximum number of notes
which
can
be generated for
each
part is as fol-
lows:
POLY*/POLY
1**
4 notes
ACCOMP 1
4 notes
ACCOMP 2
3 notes
ACCOMP 3
BASS
1 note
DRUMS
4 notes
*KN200 **KN400
Part
V
•
Transmit
mode
You
can send data for the automatic accompani-
ment pattern of the
AUTO PLAY CHORD.
APC mode (on)
The
AUTO PLAY CHORD's ACCOMP and BASS
patterns which are formed
by
playing chords
on
this instrument's keyboard are transmitted
as
per-
formance data.
• Program
change
mode
You can match the sound change data when
transmitting/receiving between different Technics
instruments.
Normal (off)
The program change numbers correspond to the
order of the sounds
as
they are lined
up
from the
leftmost sound of the bottom row and beginning
with
1.
The
KEYBOARD PERCUSSION instrument sounds
correspond
to
the Keyboard's key note numbers.
• NOTE ONLY
on
Of the channel voice message, only note on/off
and
all-nate-off data
is
transmitted/received.
• PANEL MEMORY
program
change (KN400)
Enable
(on)
You
can transmit/receive program change data
from the PANEL
MEMORY buttons 1
~4
through
the
POLY 1 basic channel.
• MIDI
clock
Internal clock (off)
This instrument's
RHYTHM and SEQUENCER per-
formance
is
controlled
by
the internal clock, not
by
the connected instrument's clock.
MI
DI
Chord mode (off)
The chord data is transmitted
exactly
as
the chords
are
played
on
the keyboard.
Technics (on)
Program change numbers are standardized among
all Technics models which are set to this mode:
the program change number assigned to a given
sound
on
one model is assigned to the same sound
on
all models
in
the same mode.
The
KEYBOARD PERCUSSION instrument types
correspond
to
the same key note numbers for con-
nected Technics
models set
to
this
mode.
off
All channel voice
message
data used
in
the
KN200/KN400 can
be
transmitted/recieved.
Disable (off)
You
cannot transmit/receive program change data
from the PANEL
MEMORY buttons.
External clock (on)
This instrument's
RHYTHM and SEQUENCER per-
formance is
controlled
by
the connected
instrument's
clock.
To Next Page
Loading...
