Part
III
Editing
a
preset
rhythm
pattern
The editing feature of the COMPOSER allows you
to modify any of the factory-preset
rhythms
or
even
youi' original rhythms, and then store the
new patterns in the four COMP buttons.
1.
Select the rhythm to be modified with the but-
tons in the
RHYTHM
SELECT
matrix.
2. Press the RECORD button
in
the COMPOSER
section.
RECORD
o
o
3. Press one of the COMP
1-4
buttons in which
to store the modified rhythm pattern. The se-
lected rhythm is now recalled. "
ALL
" ap-
pears on the
display.
RHYTHM SELECT
COMP
1
00
COMP
2
0
0
COMP
3
0
0
COMP
4
0
0
4. Press the RECORD button 1 to 5 times so that
the indicator for the part you wish to edit is
lit.
For example, if you want to modify the
BASS
part, press the RECORD button two times.
RECORD
o
o
5.
You can clear the part and begin storing it from
the beginning, or you can edit the part without
clearing it.
• Press the
CLEAR
button ONLY if you wish to
delete all of the pattern for the selected part
and store a new pattern from the beginning.
Recording
and
playback
6. If desired, use the RECORD button to select
other parts to modify.
RECORD
o
o
7. When you have
complet~d
making the modi-
fications, press the RECORD button the num-
ber of times required for the RECORD button
indicator to turn off. The modified version of
the rhythm pattern is now stored in the specifi-
ed COMP button.
RECORD
o
o
• Note regarding
modification
of
preset rhy-
thm
patterns
Preset rhythms which are stored
in
the COMP
buttons may have a somewhat different nuance
from the
original preset rhythms.
Part
III
Play
back
the
stored
pattern
The rhythm pattern you stored
in
the COMPOSER
is played back automatically while you specify the
chords in the same manner as for the AUTO
PLAY
CHORD.
1.
Press the button in which the rhythm pattern
is stored (one of the COMP
1-4
buttons in the
RHYTHM
SELECT
matrix).
• The indicator lights.
RHYTHM SELECT
COMP
1
00
COMP
2
0
0
COMP
3
0
0
COMP
4
0
0
2. Press the ONE-FINGER button or FINGERED
button of the AUTO
PLAY
CHORD to turn it
on.
• The indicator lights.
AUTO PLAY
CHORD
ONE-FINGER
o
o
FINGERED
o
o
MEMORY
o
o
3. Press the ACCOMP
PART
1, 2 and 3 buttons
to turn them on.
-ACCOMP
PART-
2 3
000
000
• The indicators light.
Notes:
• Select the keyboard split point with the KEY
SPLIT
button.
• You can turn off any of the ACCOMP
PART
buttons during playback if you do not wish the
correponding part(s) to be
played back.
• Adjust the volume of the
BASS
and ACCOMP
PART 1, 2 and 3 with the corresponding
BALANCE
buttons. (Refer to Vol.
2,
page 5.)
Recording
and
playback
4. Press the START/STOP button.
START/STOP
o
( )
• The DRUMS pattern begins to play.
5. Specify the chord
on
the left part of the key-
board, and
play the melody
on
the right part.
Keyboard
Split point
(left part)
Specify chord
1
(right part)
Play melody
•
The
BASS
and ACCOMP 1, 2 and 3 parts are
played back in the chord you specify on the
keyboard.
6. To stop the rhythm pattern
playback, press the
START/STOP button.
START/STOP
o
( )
FILL
IN, INTRO and ENDING patterns
• If a preset rhythm pattern was edited and
stored
in
a COMP button, when the
FILL
IN or
INTRO & ENDING button is pressed while the
pattern is
playing back, the
FILL
IN, INTRO or
ENDING pattern corresponding to the original
rhythm will sound.
.If
the COMP button's memory is erased and a
completely new pattern is stored, the
FILL
IN,
INTRO
and ENDING patterns that sound will
be those of the rhythm which was
selected
immediately
before beginning the recording
procedure.
To Next Page
Loading...
Need help?
General
