Wallpaper Setting
You can change the background pattern (WALLPAPER) on your display.
1. On the CUSTOMIZE MENU display, select
WALLPAPER SETTING.
• The display looks similar to the following.
2. Use the buttons to the left of the display to
select a display category.
HOME PAGE/SOUND & RHYTHM SELECT:
The standard display and the displays to select
the sound and rhythm.
MENU PAGE:
MENU display
OTHER:
Displays different from the above.
3. Use the VALUE ∧ and ∨ buttons to select a
mode.
DEFAULT:
Select the initialized settings.
PRESET:
Settings selected with PRESET.
• Use the PRESET ∧ and ∨ buttons to select a
WALLPAPER. (The selected WALLPAPER is
shown.)
4. Press the OK button.
Data Protection
Data which you don’t want to change but which is normally overwritten during disk load, song change,
or the automatic setting functions, etc. can be protected from accidental overwriting.
1. In the CUSTOMIZE MENU display, select
DATA PROTECTION.
• The display looks similar to the following.
2. Use the ITEM ∧ and ∨ buttons to select an
item.
3. Use the ON/OFF button to select ON or OFF.
ON:
The data is protected and will not be
changed.
OFF:
The data is not retained.
4. Repeat steps 2 and 3 for each item.
5. Press the OK button.
Customize
Part XII Customize
184
QQTG0671
To Next Page
Loading...
Need help?
General
