SEQUENCER menu
The configuration of the SEQUENCER setting
display is as follows.
1. Press the PROGRAM MENUS button to turn
it on.
• The display looks similar to the following.
2. Select SEQUENCER.
• The display looks similar to the following.
• The SONG SELECT ∧ and ∨ buttons are used
to select a song.
• You can press the NAMING button and assign
a name to the song. (Refer to page 85.)
• You can press the PANEL WRITE button to
store the current settings of the instrument at
the beginning of the song. (Refer to page 86.)
3. Select RECORD & EDIT, COPY & PASTE or
RANGE SET, and follow the corresponding
procedure.
<RECORD & EDIT>
<COPY & PASTE>
<RANGE EDIT>
PROGRAM
MENUS
SD AUDIO SYNCHRO
The sound data on the SD card in the SD slot can be synchronized with SEQUENCER playback.
1. On the SEQ MENU display, press the SD
AUDIO SYNCHRO button.
2. Use the ∧ and ∨ buttons to select the song
number you wish to synchronize from the
PLAYLIST.
3. Play back the SEQUENCER song. (Refer to
page 83.)
Sequencer
Part IV Sequencer
75
QQTG0671
To Next Page
Loading...
Need help?
General
