Technics SX-PX201 User Manual

Removing the keyboard assembly
1. Remove the control panel (see Step [2).
2, Remove the keyboard assembly holding screws
located on the bottom of the cabinet (® 10 pes.).
Keyboard Assembly
Ee
Keys (s)
Disassembly
1. Remove the keyboard assembly (see Step [5)).
2. To release the key claw.
© Press the front of the key downward slightly.
© Press the rear of the key forward gently.
3. To remove the key, lift as shown-in Fig. 9.
NOTE:
« The key claw is easily broken. Do not apply undue
force. Should a key claw break, it can still be used;
however, a replacement is recommended,
* Ifa black key is to bereplaced it is necessary to
remove both adjacent white keys.
[Fig.9]
Assembly
1. Insert the front part of the key into the chassis.
2. Insert the plate spring into the hammer notch as
shown in Fig. 10.
3. While slowly lowering the key into the chassis, insert
the plate spring into the notch at the rear of the key.
4, Carefully insert the key into the opening in the chassis
and slide the key towards the rear to lock it in place.
[Fig.10]

Technics SX-PX201 Specifications

General

Brand	Technics
Model	SX-PX201
Category	Music Equipment
Language	English