Please read the following notes before operating your camera:
Avoid using or placing the camera in the following locations:
• Thiscameraisaprecisionelectronicdevice.Treatitwithcare
• Donotattempttoservicethiscameraasyouwillinvalidatethewarranty.
• Donotexposethiscameratodirectsunlighttoavoidriskoffire.
• Before taking pictures with this camera of any important occasion test the camera beforehand ensure that it is fully
functioning,thatthebatteryischargedandthatthereissufficientspaceintheinternalmemory.
•
Before Using YourCamera
BATTERYCARE
When Using The Camera
•
• Toensurethecameraphotographsnormally,donotdrop,shakeorhitthecamerawhentakingpictures.
Damp and dusty places. Sealedvehicles,places
exposedtodirectsunlightorhigh temperatures. Places subject to severe vibration or physical shocks. Locations full of smoke, fumes,
dustorsteam.Outdoorsinrainorsnow.
• If water hasentered the camera,immediately turn the powerOFF. Take the cameratoa qualified technicianfor examination
andrepairbeforeusingitagain.
This product contains an integral Li-ion battery. There isa risk of fire and burns if the camerais handled improperly. Do not
disassemble, crush, puncture, or dispose of the camera or the battery in fire or water. Do not attempt to open the camera case or
service the batterypack. Use aqualifiedservice technician toreplace the batteryand replace only witha battery designatedfor this
product.Disposeoftheproductwiththebatteryintactinaccordancewithrecyclingregulationsinyourarea.
IMPORTANT USER INFORMATION
2
MycameramakesnoresponsewhenIpresstheMODEorShutterButtons
Therearecolourspots,blotchesorbandingonmyphotos.
Mypicturesareblurred,orthereareshadowsonthepicture.
Thecamerabeepsinsteadoftakingapicture.
Afterinstallingthesoftware,whenIuploadthephotosfrommycamerathereisaniconshowing“nophotosincamera”.
Ifthisdoesnotsolvetheproblem:
Ihavedonethis itstilldoesn'twork.
!
AfterinstallingthesoftwareandconnectingthecameratothePC,inDeviceManagerIsee“unknownUSBdevice”.
SlidethepowerswitchOFF,wait10secondsandthenswitchthepoweronagain.Youwillloseanyimagesstoredinthecamera.
Holdthecamerasteadyandensurethelensiscleanandnotobscuredbythestraporyourhand.
Thereisnotenoughlight,thecameraistooclosetotheobject,thememoryisfull.
DoestheCameradisplayindicatethattherearepictures?Ifso,cCheckthatyouhaveconnectedthecameraproperlytothePC.
WinXPorWin2000:
(1)OpenDeviceManager.SelectMyComputer,Presstherightkey/Properties/Hardware/DeviceManager…
(2)SelectAction/Scan for hardware changes]
Win98SEorWinME:(1)Proceedas(1)above.(2)Presstherightkey/Refresh
Isthereayellowmark“ ” showing at Device Manager/Imaging devices/ Dual Camera? If there is please follow the steps below:
(1)InDeviceManager,selectDualCamera(2)Pressrightkey/[Uninstall](IfOSisWIN98SEorWINME,Pressrightkey/[Remove])
(3)UnplugthecamerafromthePCandrestartthecomputer.(4)Re-plugthecamera-thedevicewill re-installautomatically.
Checkifyourcameraisconnectedtoyourcomputercorrectly.Ifitisdothefollowing:
DisconnectthecamerafromthePC.Placethesoftwarediscinthecomputer.ClicktheInstallDrivericon.
Youwillbeaskedifyouwanttouninstallthedevice.SelectYES.Restartthecomputerandreloadthedriver.
TROUBLESHOOTING
If you are experiencing problems, please look at the Q&A section below and see if your problem is in this list. If you still have
problemsaftergoingthroughthesolutionspleaseringthehelplineforfurtheradvice-thenumberisonthenextpage.
19
}
To Next Page
Loading...
