PC SETUP MENU
To access this menu, press [MENU] button on the remote control.
If you wish to make changes to any of the default settings, use the scroll buttons. To confirm any
settings press [OK] button.
To exit this menu at anytime, press [EXIT] button.
Auto Configuration of Screen - Lets you automatically configure the television to be used as a computer monitor
Horizontal Position - Changes the horizontal position of the picture
Vertical Position - Changes the vertical position of the picture
Phase - To adjust delay time of phase in order to reduce the noise of picture
Clock - Alter this in order to reduce the noise within the picture
21
Tip: If the computer is left in-active for a period of time, the television will switch into a ‘sleep’ state (the screen
will power off to save power).
User Guide
To Next Page
Loading...
Need help?
General
