Technika SR08 - Troubleshooting; Further Information

TROUBLESHOOTING
If your DPF seems not to be working as well as you might expect, please
work through this checklist before returning the product to Tesco.
The DPF will not switch on.
Switch o, Check the power supply connections, switch on again.
The DPF will not recognise a memory card.
Youwereplayinganothercardwhenyouinsertedthiscard.Re-insert
thecard.Youmayneedtoreformatthecard.
The DPF will not play pictures on a card.
The pictures must be in jpg form andsmallerthan4000x4000pixels.
My PC will not recognise the DPF.
YoumayhaveaUSBdriveinsertedintheframe.Removethedrive,
removetheUSBcable.Switchtheframeoandon.Re-inserttheUSB
cable.The PC will now recognise the frame.
The DPF will not copy pictures to a card.
The card is full. The card is write-protected. The card will need re-for-
matting even though you can play pictures from the card on the DPF.
The DPF will not copy pictures to the internal memory.
The internal memory is full.
The handset is erratic.
The handset is too far from the frame. There is something between the
handset and the DPF. Replace the battery.
AFTER USE
SwitchthesetoviathePOWERswitch.Unplugtheadaptorfromthe
mains and then unplug the adaptor from the Picture Frame.
UnpluganymemorycardorUSBstick.
Store the unit and power adaptor in a cool dry place, out of the reach
of children and pets.
Note: Though you can leave the frame in Standby indenitely we do
not recommend this for the following reasons:
•TheUSBportsarepoweredinstandby.
•TheconnectedACadaptorcablecouldbeasourceofdanger.
•Youwillconsumepowerunnecessarily.
Further Information
Thescreen resolution is 800x600 pixels.This is a totalresolutionof
480,000 pixels (0.5MP). High resolution pictures will slow loading
times without improving viewability.
After extended use, the frame may get warm. This is normal and not a
cause for concern.
Contrary to popular belief, if you leave a static picture on the screen for a
long time you may leave a permanent ‘after image’ on the screen. Slide
show mode stops this from occurring.
Page 19