Failure Display and Inspection
If an abnormality occurs, the induction hob will enter a protective state
automatically and display corresponding protective codes:
Problem Possible causes What to do
E4/E5 Temperature sensor failure Please contact the Technika service
department.
E7/E8
Temperature sensor of the
IGBT failure.
Please contact the Technika service
department.
E2/E3
Abnormal supply voltage
Please inspect whether power supply
is normal. Power the hob on after the
power supply is back to normal.
E6/E9 Bad induction hob heat
radiation
Please restart after the induction
hob cools down.
WARNING: For you own safety, please do not disassemble the unit by yourself.
Any repairs must be carried out by a suitably qualified technician.
Technical Specification
Induction Hob
TGC6IND-5
Cooking Zones 4 Zones
Supply Voltage 220-240V~ 50 Hz or 60Hz
Installed Electric Power 7200W
Product Size D×W×H(mm) 590×520×58
Building-in Dimensions A×B (mm) 565×495
Induction Hob TGC9IND-5
Cooking Zones 5 Zones
Supply Voltage 220-240V~ 50 Hz or 60Hz
Installed Electric Power 10800W
Product Size D×W×H(mm) 900×520×58
Building-in Dimensions A×B (mm) 860×495
Weight and Dimensions are approximate. Because we continually strive to improve our
products we may change specifications and designs without prior notice.
To Next Page
Loading...
