17
PROGRAM PLAY OF A DVD OR AUDIO CD
You can program up to 20 chapters (DVD) or tracks (audio CD) to play in your preferred
sequence.
Press • PROGRAM.
The program screen will open. The rst 10 program entries are shown.
Playing the program:
When you have completed entry, highlight ‘START’ at the bottom of the screen.•
Press • ENTER.
Entering a program:
Use the • buttons to highlight the program entry you want to change.
Press • ENTER to enter/change this item.
Enter the Title and Chapter numbers (DVD) or Track number (CD) with the numeric •
keypad. Use the 10+ button to enter numbers greater than 9.
As you complete each entry, the next line will be highlighted.•
Continue to enter all the chapters/tracks in your program in this way.•
Press • } or { to step between the rst and second pages of program entries.
Exiting program entry:
If you want to leave the program entry screen and erase the program you entered, •
highlight ‘EXIT’ at the bottom of the screen.
Press • ENTER.
The program screen will close.
The program will start to play.
Clearing a program:
Press • . to stop play.
Press • . again.
Program repeat:
While playing a program, repeat modes can be set in the normal way.•
To Next Page
Loading...
Need help?
General
