TechniSat DIGITRADIO 10 C - Page 106

106
5.4.2 Switching o the device
> By briefly pressing the On/Standby buon you can switch the device to
standby mode. [Standby] appears briefly on the display. The date and time
are shown on the display. The display brightness in standby mode can be
adjusted as described in Section 11.2.
> Pressing and holding the On/Standby buon will put the device in power-
saving mode and the display will go o. [Power o] appears briefly on the
display.
5.4.3 Selecting the source
> Press the MODE buon (25) to switch between the DAB+ (Digital Radio), FM
and Bluetooth sources. Press the buon repeatedly to do so.
The sources are shown using an icon.
DAB+