TechniSat DIGITRADIO 10 C - Page 114

114
7.2 DAB+ (digital radio) reception
> Press the MODE buon until [DAB] is shown on the display.
If DAB+ is being started for the first time, a full station scan is performed. Aer
the scan is complete, the first station is played back in alphanumeric order.
7.2.1 Performing a full scan
The automatic scan Full Scan scans all DAB+ Band III stations and thereby
finds all stations being broadcast within the reception range.
Aer the scan is complete, the first station is played back in alphanumeric
order.
> In order to perform a complete scan, press the SCAN buon on the remote
control.
Alternatively:
> Open MENU > [Scan Seings] > [Full Scan] and press the OK buon.