TechniSat DIGITRADIO 10 C - Page 115

115
DE
EN
FR
NL
> [Scanning...] appears on the display.
During the scan a progress bar and the number of stations found is displayed.
If no stations are found, check the dipole antenna and change the installation
location if required (Section 5.3.1/3.2.1).
7.2.2 Selecting the station
> By pressing the P+ or P- buons, you can call up the station list and switch
between the available stations.
According the seing made in MENU > [Scan Seings] > [Change Station],
you will then need to press the OK buon to play the selected station (option:
Change Station > List) or the station will play automatically (option: Change
Station > Channel).
7.2.3 Saving DAB+ stations to a memory slot
The programme memory can save up to 20 stations within the DAB range.
> First select the desired station (see section 7.2.2).