TechniSat DIGITRADIO 10 C User Manual

139
DE
EN
FR
NL
11.3 Language
> Press the MENU buon and use the  /  buons to select [System Seings]
> [Language] and press OK.
> Use  /  to select one of the available languages and confirm by pressing
the OK buon.
11.4 Factory seings
If you change the location of the device, e.g. when moving house, it is possible that
the saved stations can no longer be received. In this case you can reset the device to
Factory Seings to delete all the saved stations and then launch a new scan.
> Press the MENU buon and use the  /  buons to select [System Seings]
> [Factory Seings] and press OK.
> Use  /  to select the [Yes] option, then press OK to reset to the factory
seings.
All previously stored stations and seings will now be deleted. The device is
now in the same status as when delivered.

TechniSat DIGITRADIO 10 C Specifications

General

Package depth	173 mm
Package width	175 mm
Package height	80 mm
Package weight	612 g
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	5 - 90 %
Audio (L/R) out	1
Bluetooth profiles	A2DP, AVRCP
Docking station included	No
Apple docking compatibility	Not supported
Radio type	Personal
Tuner type	Analog & digital
FM band range	87.5 - 108 MHz
Supported radio bands	DAB+, FM
Preset stations quantity	40
Bluetooth version	4.1
Display type	TFT
Display diagonal	2.8 \
Display resolution	240 x 320 pixels
Thermometer	-
Product color	Black, Silver
On Screen Display (OSD) languages	CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, ITA, NOR, POL, POR, SLK, SWE, TUR
RMS rated power	- W
Power source	AC
AC input voltage	230 V
DC input voltage	5 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	60 mm
Width	120 mm
Height	90 mm
Weight	153 g