TechniSat DIGITRADIO 10 C

140
> The display will show [Restart ...] and the device will start with the language
selection [Language]. Use  /  to select one of the available languages and
confirm by pressing the OK buon. The device then automatically performs a
complete scan in DAB mode. While scanning, the display information shows
the progress as well as the number of digital radio stations detected. Aer
completing the station scan the first DAB+ channel is played.
11.5 SW version
Under SW Version you can check which SW version is currently installed.
> Press the MENU buon and use the  /  buons to select [System Seings]
> [SW Version] and press OK.
> The current soware version is displayed.
11.6 SW update
The SW update option is used to update the device soware and is only intended for
use when servicing.