10
4. To set your prefer EQ, press or button
to select ‘My EQ Setup’, and then press
button to confirm. Press or button to
select through ‘Treble’ and ‘Bass’, and then
press button to confirm. Press or
button to set the value of Treble and Bass
among ‘-7’ to ‘+7’, and then press button to
confirm. Press and hold MENU button to exit
setting.
Setting Time/Date
1. Press and hold MENU button, and then press
or button to select ‘System Settings’,
press button to confirm.
2. Press or button to select ‘Time/Date’,
and then press button to confirm.
3. Press or button to select options, and
then press button to confirm the setting
Set Time/date:
Manually set-up both Time
and Date
Auto update:
‘from Any’, ‘from Digital
Radio’, ‘Update from FM’ or
‘No Update’
Set 12/24 hour
format:
‘12 Hour’ or ‘24 Hour’
Set date
format:
‘DD-MM-YYYY’ or
‘MM-DD-YYYY'
4. Then set time according to your personal
preference.
Setting Backlight
This radio display has a backlight with adjustable
brightness level and adjustable timeout (this is the
time delay, in seconds, after which the display switch
to set backlight level of Dim level).
1. Press and hold MENU button, and then press
or button to select ‘System Settings’,
press button to confirm.
2. Press or button to select ‘Backlight’,
and then press button to confirm.
3. Press or button to select ‘On level' and
'Dim level', and then press button to
confirm.
4. Press or button to set backlight level
and backlight timeout, and then press
button to confirm the setting.
On level
High
Medium
Low
Dim
level
High
Medium
Low
Setting Language
This feature enables you to change menu language.
1. Press and hold MENU button, and then press
or button to select ‘System Settings’,
press button to confirm.
2. Press or button to select ‘Language’,
and then press button to confirm.
3. Press or button to select your language,
and then press button to confirm.
Factory Reset
Doing a factory reset clears all user defined setting,
replacing them with the original default values, so
time/date, DAB station list and preset stations are all
lost.
1. Press and hold MENU button, and then press
or button to select ‘System Settings’,
press button to confirm.
2. Press or button to select ‘Factory Reset’,
and then press button to confirm.
3. Press or button to select ‘Yes’, and then
press button to confirm.
Viewing Software Version
This information may be requested when dealing
with technical support issues.
1. Press and hold MENU button, and then press
or button to select ‘System Settings’,
press button to confirm.
2. Press or button to select ‘Software
Version’, and then press button to confirm.
The software version will show on the display.
To Next Page
Loading...
