TechniSat DigitRadio 215 - General Operations; Setting Alarm; Setting Sleep; Setting Equaliser

9
General Operations
Setting Alarm
Your radio includes dual alarms. Set Alarm, making
sure set time at first.
Keeping power adapter connected when standby is
highly recommended to avoid alarms not work once
battery power is used up.
1. Press and hold MENU button, and then press
or button to select ‘Alarm’, and then
press button to confirm.
2. Press or button to select ‘Alarm 1’ or
‘Alarm 2’, and then press button to confirm.
3. Press or button to select options, and
then press button to confirm the setting.
Alarm:
Press button to set
alarm On or Off
Frequency:
Daily, Once, Weekends or
Weekdays
Wake Up
time:
00:00 (manually set up the
time )
Source:
Buzz or Digital Radio, FM
(If the wake-up source is
Digital Radio and the DAB
signal strength is low, the
buzz alarm will be triggered.)
Preset:
Last listened or saved
preset station (not available
for Buzzer mode)
Duration:
15/30/45/60/90/120 minutes
Alarm
volume:
Press VOLUME+ or
VOLUME- button to adjust
the alarm volume
4. Press and hold MENU button to exit alarm
setting. or icon will show on the display.
5. To temporarily switch off alarm, press
button to activate Snooze function when alarm
sounds. Press button repeatedly can set
Snooze period time of 5, 10, 15 or 30 minutes in
turn. The set snooze time will show on the
display.
 Note: the options of Snooze time depends
on which alarm duration time you selected.
Alarm
duration time
Snooze time
15 minutes 5 or 10 minutes
30 minutes 5, 10 or 15 minutes
45/60/90/120
minutes
5, 10, 15 or 30 minutes
6. To turn off alarm, press POWER/STANDBY
button when alarm sounds. The unit will go to
standby.
7. To cancel Alarm, refer to steps1-4 to set alarm
‘Off’. or icon will disappear from display.
Setting Sleep
This feature enables your radio to switch to standby
mode by itself after a set sleep time.
1. Press and hold MENU button, and then press
or button to select ‘Sleep’, and then
press button to confirm.
2. Press or button to browse options
Sleep Timer Off, 15, 30, 45, 60 or 90 minutes,
press button to confirm. The icon and
sleep time will show on the display.
3. To cancel sleep feature while the sleep timer is
still counting down, redo steps 1-2 to select
'Sleep Timer Off'.
Setting Equaliser
This feature enables you to choose a sound
equalization profile. Each of the equalization setting
will change the tone of the sound from your receiver
when selected.
1. Press and hold MENU button, and then press
or button to select ‘System Settings’,
press button to confirm.
2. Press or button to select ‘Equaliser’,
and then press button to confirm.
3. Press or button to select a profile
through ‘Normal’, ‘Classic’, ‘Jazz’, ‘Pop’, ‘Rock’,
‘Speech’ and ‘My EQ’, and then press
button to confirm.