10
FM Mode
Selecting FM Mode
1. Press MODE button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz).
Otherwise, the last listened FM station will be selected.
3. To manually change the FM frequency, making sure no other order/system setting is
going on, turn SCROLL&SELECT/SNOOZE knob to change the frequency by 0.05MHz
per step.
4. To automatically scan, while FM frequency shows up, turn
SCROLL&SELECT/SNOOZE knob clockwise or anticlockwise, and then press
SCROLL&SELECT/SNOOZE knob, your radio will skip forwards or backwards until it
reached the next available station.
Scan Setting
By default, FM scans stop at any available station. This may result in a poor signal-to-noise
ratio (hiss) from weak stations.
1. To change the scan settings to stop only at stations with good signal strength, press
MENU button, and then turn SCROLL&SELECT/SNOOZE knob to select Scan setting,
press SCROLL&SELECT/SNOOZE button to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to browse ‘Strong stations only’, and then press
SCROLL&SELECT/SNOOZE knob to confirm.
Audio Setting
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a
poor signal-to-noise ratio (hiss).
1. To play weak stations in mono, press MENU button, and then turn
SCROLL&SELECT/SNOOZE knob to select Audio setting, press
SCROLL&SELECT/SNOOZE knob to confirm.
2. Turn SCROLL&SELECT/SNOOZE knob to browse ‘Forced mono’, and then press
SCROLL&SELECT/SNOOZE knob to confirm.
Viewing Station Information
FM stations broadcast additional information. Press VOLUME / INFO knob repeatedly to view
information through Radio text, Program Type, Program name, Audio info, Time and Date.
To Next Page
Loading...
Need help?
General