TechniSat DIGITRADIO 380 CD IR

69
DE
EN
FR
NL
To find out more about the current connection select display seings.
Select Manual seing, if you know your network parameters and you would
like to configure them manually. Take note of the instructions on the display.
Select Delete network profile, to delete connections no longer required.
Select Allow WiFi connection in standby mode if the WiFi connection
should be retained in standby mode as well. This seing increases power
consumption but enables app control via the TechniSat CONNECT app.
The menu item [Net Remote PIN] can be used to configure the PIN for the
control with the TechniSat CONNECT app. The standard PIN is: 1234. The
TechniSat CONNECT app can be loaded free from the usual app stores.
17.4 Time seings
> Press the MENU buon and then select [System Seings] > [Time and
Date].
> Select [Time/Date Seing] to set the time and date manually.
Use the OK buon to select a value. Change it using the  or  buons.
> Confirm by pressing OK.
> Select [Update seings] to determine whether time updates should be
automatic via DAB, FM or the Internet, or whether you would like to enter it
manually.
> To do so, select [DAB update], [FM update], [NETupdate] or [No update].
> Under the [Time format seing] option you can activate 12 or 24 hour
format. Confirm your selection with the OK buon.
> Under [Set time zone], select the current time zone in your location and,
under [Summertime] you determine whether summertime should currently
be active. This seing is displayed only if you have previously selected NET
update under the update seings.
> Under [Standby clock] you can choose between an analogue or digital
standby clock display.