TechniSat DIGITRADIO 51 User Manual

11
9.1.5.1.4 Set date format
In the time menu, press ‘ < ’ or ‘ > ’ button to select ‘Set date format’, and then press
‘Select/Menu’ button to confirm.
Press ‘ < ’ or ‘ > ’ button to select the date format 'DD-MM-YYYY'(default) or
'MM-DD-YYYY', and then press ‘Select/Menu’ button to confirm.
9.1.5.2 Backlight
This radio display has a backlight with adjustable timeout (this is the time delay, in
seconds, after which the display switched off).
In the backlight menu, press ‘ < ’ or ‘ > ’ button to select ‘Timeout’, and then press
‘Select/Menu’ button to confirm.
Press ‘ < ’ or ‘ > ’ button to select a particular option, and then press ‘Select/Menu’
button to confirm the setting.
Timeout options: NO Timeout(default)/5 sec/ 10 sec /30 sec /1 Mins/2 Mins/3 Mins
You can adjust brightness level by pressing ‘- Dimmer +’ buttons (please refer to 6).
9.1.5.3 Language
The default menu language is German. You can change to your desired language.
There are six languages available: German/English/French/Spanish/Italian/Danish
In system menu, press ‘ < ’ or ‘ > ’ button to select ‘Language’, and then press
‘Select/Menu’ button to confirm.
Press ‘ < ’ or ‘ > ’ button to select your language, and then press ‘Select/Menu’ button
to confirm.
9.1.5.4 Factory Reset
A factory reset clears all user defined setting, replacing them with the original default
values, so time/date, DAB station list and preset stations are all lost.
In system menu, press ‘ < ’ or ‘ > ’ button to select ‘Factory Reset’, and then press
‘Select/Menu’ button to confirm.
Press ‘ > ’ button to choose <Yes>, and then press ‘Select/Menu’ button to confirm.
9.1.5.5 SW version
This displays the current software version.
In system menu, press ‘ < ’ or ‘ > ’ button to select ‘SW version’, and then press
‘Select/Menu’ button to confirm. The LCD will display the software version.
9.2 FM radio mode
Under the advance settings menu, press ‘ < ’ or ‘ > ’ button to scroll through the menu
options. Then stop at your preferred option and press ‘Select/Menu’ button to confirm.
The advance settings menu options are:
- Scan setting
- Audio setting
- System (please refer to 9.1.5)

TechniSat DIGITRADIO 51 Specifications

Audio

audio output	1.5W RMS

Power

power consumption in operation	3 W
standby power consumption	< 1 W
power supply input	DC 6V/500mA
power adapter input	AC 100-240V, 50-60Hz

Frequency Ranges

FM frequency range	87.5-108MHz
DAB frequency range	174.928-239.200MHz

Display

display type	LCD
display resolution	High resolution

Weight and Dimensions

width	150mm
depth	134mm
height	53mm