TechniSat DIGITRADIO 51 User Manual

7
button to confirm. Duration options: 15/30/45/60/90Mins
Press ‘ < ’ or ‘ > ’ button to set alarm source, and then press ‘Select/Menu’ button to
confirm. Source options: Buzzer/DAB/FM
When choosing DAB and FM for alarm source, Last listened and Preset stations you
have stored are available. Press ‘ < ’ or ‘ > ’ button to select and press ‘Select/Menu’
button to confirm.
Note: If selected DAB for alarm source and the DAB signal strength is low, the buzzer alarm will be
triggered instead.
Press ‘ < ’ or ‘ > ’ button to select which days the alarm will be active, and then press
‘Select/Menu’ button to confirm. Alarm active options: Daily/Once/
Weekends/Weekdays
Press ‘- Volume +’ buttons to adjust alarm volume, and then press ‘Select/Menu’
button to confirm.
The radio will display ‘Alarm Saved’. The alarm icon ‘ ‘ or ‘ ‘ will show on the
display.
Note: Alarm info will show on the display. Alarm 1 info and Alarm 2 info shows in turn if both alarms are
set.
4.1 Snooze function
When alarm sounds, press ‘Snooze’ button to activate snooze. Press ‘Snooze’ button
repeatedly to set snooze time to 5, 10, 15 or 30 minutes, then the alarm will temporary
stop. The radio will go to standby mode and show snooze time.
Note: With the snooze time particular options are relative to the alarm duration time you selected.
Duration
Snooze time
15 minutes
5, 10 minutes
30 minutes
5, 10, 15 minutes
45/60/90 minutes
5, 10, 15, 30 minutes
4.2 Stop alarm
You can stop the alarm by pressing ’ ’ button when alarm sounds.
4.3 Switch alarm off
Press ‘Alarm 1’ or ‘Alarm 2’ button to switch alarm off. The alarm icon ‘ ‘ or ‘
‘ will disappear from display.
Note: Repeatedly press ‘Alarm 1’ or ‘Alarm 2’ button will switch alarm between on and off.
5 Sleep
This enables your radio to switch to standby mode by itself after a set sleep time
Press ‘Sleep’ button repeatedly to select a sleep time, and then press ‘Select/Menu’
button to confirm. The sleep icon ‘ ‘ will show on the display. Sleep time options:
off/15/30/45/60/90 minutes
After set the sleep time, you can view the sleep time countdown by pressing ‘Sleep’
button.
Press ‘Sleep’ button repeatedly to select ‘Sleep off’, and then press ‘Select/Menu’
button will turn off sleep timer.

TechniSat DIGITRADIO 51 Specifications

Audio

audio output	1.5W RMS

Power

power consumption in operation	3 W
standby power consumption	< 1 W
power supply input	DC 6V/500mA
power adapter input	AC 100-240V, 50-60Hz

Frequency Ranges

FM frequency range	87.5-108MHz
DAB frequency range	174.928-239.200MHz

Display

display type	LCD
display resolution	High resolution

Weight and Dimensions

width	150mm
depth	134mm
height	53mm